This ROYAL BLUE cell phone case prevents continuous stress on your own body caused by high-frequency mobile radiation and simultaneously protects your cell phone from scratches.
That is how the eWall cell phone case works
eWall stands for a newly-developed fabric (shielding fabric) with excellent shielding qualities. The base forms a specially-worked thread made out of pure silver. The silver thread is given the ability to shield against electromagnetic waves by this work. This silver thread is integrated into a fabric through a special manufacturing process.
The resulting fabric shields against well over 95% of electromagnetic waves. This newly-developed fabric’s excellent shielding capabilities has been confirmed by the University of the German Armed Forces in Munich, among others.
The negative stress caused by electromagnetic waves – which is amplified by carrying a cell phone on your person and which is particularly high during a phone call – can be minimized by this cell phone case. Protect yourself and your children by taking precautions.
Correct size of the cell phone cover / case with radiation protection
The cell phone case should be 1,5 cm wider and 2 cm higher than your smartphone or mobile phone.
Increased battery use caused by misuse
Smartphones can be seen as “intelligent” cell phones, ie. when reception is low, the cell phone automatically increases its transmission power and needs more battery power as a result. The cell phone battery must inevitably be charged more often. This automatically happens when the cell phone is placed in the pocket at the back and the case is closed. The reception is broken, the cell phone increases its transmission power to bypass this disruption. This will not work most of the time, which causes the battery to lose power faster. Only use the rear pocket of the phone case for short periods of time, such as at the doctor. We recommend activating flight mode or turning the device off if you are going to use it for a long period of time.
SIMPLE USE OF THE CELL PHONE COVER WITH RADIATION PROTECTION FOR EFFECTIVE PROTECTION
The eWall cell phone case contains two pockets. The front one attaches to the mobile to the cell phone and reduces the radiation that reaches the body by up to 95% when in a call. If the cell phone is put in the bigger rear case and closed with the elastic band, the signal will be cut off. As soon as the cell phone is taken back out, the reception will come back very shortly.
It has occasionally been noted that near radio masts (<100 meters), extremely high levels of radiation can lead to receiving activities, despite carefully sealing the cell phone case. This is NOT a problem with the product. However, this does lead to a considerably lower reception and, as a result, highly-reduced stress caused by radiations – just remove the cell phone from the case 30 seconds late and control the signal strength on the display.
- The smartphone or mobile is always placed in the front case with the display facing outwards. Ideally attached with the elastic band.
- When calling, take the mobile telephone out, remove it and put it back in the case the other way round. The speaker and microphone are now facing the big case. We recommend inserting the smartphone in such a way that the microphone is not covered by the phone case itself.
- You are protected BY the cell phone case during your conversation. The large case with the integrated shielding fabric must always be between the cell phone and your head. You may need to increase the volume of your cell phone because of the protective case between your ear and phone.
- After ending the call, put the mobile telephone back in the small case with the screen facing outwards.
We recommend taking the phone out, putting it in the other way round, and then back to normal again several times to make the process automatic. If you put it in the wrong way and your call is done through the small inside case as opposed to the large case, the radiation that gets to your head is increased massively because the mobile radiation can only be directed through the head. This is also why no alternative design of the cell phone cover with radiation protection can work. This “flipping” of the cell phone is absolutely necessary, any radiation protection directly on the cell phone automatically increases the radio charge for the head and brain massively during phone calls.
Johann (verified owner) –
I am happy that this case has been developed.
Anneliese Simon-Reitebuch (verified owner) –
The handling of the case is good but could be even better.
I recently turned my cell phone on and the signal was broken well on the inside. Nevertheless, a caller still managed to reach me and the phone rang. That was not the purpose of the case. I thought that the case shielded against all waves. What does the case actually shield you against?
Dietmar –
Hello, Anneliese. Yes, unfortunately, that can happen nowadays. Since the new LTE mobile communication standard and the upcoming LTE Advanced, that kind of mobile radiation has become strong enough to break through the protection from time to time. This can happen if the transmitter is very nearby (100-200 meters away, for example). The cell phone case protects against 95% of waves and not 100%. If you would not like to be reached, I would recommend activating flight mode – this is possible with a few swipes and touches on iOS and Android.
The cell phone case still lowers the mobile radiation to the head considerably – in standby and especially during calls. As said before, a full loss of the signal caused by placing the phone in the rear pocket often works for us, but not always. With enough power, any wall can be broken at any time – unfortunately.
And please do not forget that the cell phone case is also a protection for the cell phone against scratches and cracks. Two functions in one.